Welcome to The Company Which Provide CNC Networking Solutions!GET IN TOUCH
BT - 100
- Bluetooth V2.0, class1
- SPP Profile
- Working Dist.= 100m by SAT- GOIR antenna =1000m by PAT - GOIR antenna
- Maximum Tx Power=+18dBm
- Receive Sensitivity= -88dBm
- Operating Temp.=-42 to +85℃
- Transparent RS232 cable replacement
- Battery option available(on request)
- Compatible to all DNC software packages
- Plug ’n’ play device
- No IP setting required
LAN - RS-232 Converter
- Ethernet Ports - 1 No.
- RS232- 1 No.
- Speed of Ethernet = 10X100 mbps
- Data bits 7 or 8, stop bit 1 or 2, parity E,N,O
- Flow control=H/W and S/w
- Baud rate up to 115200
- Network Protocol TCP
- Compatible to Windows OS
- Operating Temp. 0 to 55℃
- Suitable for all types of CNC machines
- Drip feed possible
- Best suitable for Win Com DNC and CIMCO DNC
- Optical Isolation for RS232 of CNC is inbuilt
- Working voltage=240v
- Operating Temp.= 0 to 50℃
- Optical Isolation
- Most ideal for increasing the length of cable of RS 232 Communication
- Tested for 1000meters of cable with 9600 baud rate
- Optical isolation: Built in
- Battery Powered, Compact code loader
- Number of RS232 ports=2
- QWERTY keyboard (touch type)
- Display = 40X2 LCD with backlit
- Core module=RCM 2020
- CNC Code Loader
- Compatible to most CNC machines with RS-232 Edit, Send, & Receive functions.
- Designed for shop floor use with touch type key board
- Two RS-232 ports
- Software for down loading the files to PC is free.
- 2 MB User memory
Pen Drive Interface to CNC
- Battery powered device
- Operating Temp. 0 to 45℃
- Display 4 line Function Keys=3 No.
- CNC communication parameters are settable
- External pen drive up to 8 GB
- Drip feed mode possible
- Add external memory by any commercial USB Pen drive
- Compatible to most of the CNC Controllers.
- Communication parameters are settable
- Drip feed is supported.
- D type 9- pin
- D type 25- pin
- Indicators for +and- V
- Most ideal diagnostic device designed for testing of RS 232 cable fault, RS232 working
- It can be used with any DNC system
- Works on 240 Volts
- RS-232 signals on 9 pin D type
- Surge supressor protection at mains input
- In - Built optical isolation between RS-232 signals of input & output.
- Designed for safety of serial port of CNC.
- Any port can be input while other as output.
- Supports Hardware Handshake, RTS & CTS
- All signals are optically isolated from each other.
- Installed more than 800 units on CNCs.
- Works With CIMCO – MDC
- Operating Voltage: 24V DC
- Audio Visual Setting By CIMCO MDC Software
- One Change Over Contact
- Reset Key To Reset The Audio Visual Alarm
- 12 V DC
- Operating temperature: 0 to 45 degree C
- Line 4. Functional keys - 4 nos
- communication parameter settable
- Direct interface of pen drive
- Drip feed mode possible
- Add external memory by USB pen drive
- Works well with RS232 port of CNC
- Plug and Play devise
- Learning time 10 mins only